Dual UV & White Light Checking 

The LumaCheck Dual UV and White Light Meter has been designed to offer the user the most accurate results and versatile calibration options available on the market. The LumaCheck is a unique system design, since it is the Sensor that stores the calibration details, not the Instrument itself, meaning that only the Sensor needs to be sent for calibration subject to the standards that your facility operates in accordance with. This allows the unit of the LumaCheck to be “hot-swapped” with another sensor and remain in continuous use.


  • Excellent Results Accuracy
  • Dual Sensor
  • Interchangeable Sensor allows the LumaCheck to operate continuously
  • Lightweight and Compact
  • Battery Operated
  • Ergonomically Designed with Protective Rubber Boot
  • Full Colour Programmable Display
  • Separate Probe and Separate Cable for convenience and lower replacement costs

The LumaCheck not only has a detachable Sensor Head, but also offers a detachable cable too allowing all aspects of the LumaCheck to be interchanged. If the operator has two Sensors with the LumaCheck, this interchangeability means that operators need not be without a functional light meter during calibration. The LumaCheck is housed in an extremely robust and high-quality casing and as an exclusive Baugh & Weedon design it comes with the guarantee of high quality and renowned calibration services.

LumaCheck Standard Kit 

The LumaCheck comes as a complete kit. It comes with the following as standard: LumaCheck Unit, Sensor Head, Sensor Cable, Blue Rubber Boot, 2 x Non-Rechargeable AA Batteries, Carry Case, Quick Reference Guide and the LumaCheck Manual.


Measuring Range: White Light: 5 lux to 10,000

                                 UV Light: 0 to 10,000 uW/cm²

Resolution: White Light: 0.1 lux below 10 lux.

                     UV Light: 0.15 to 10 µW/cm2 (micro watts per square centimetre)

Units: White Light: Foot Candles (ft-c or fc or lm/ft) or Lux

            UV Light: µW/cm2 (micro watts per square centimetre


Display: 2.8” (70mm) 320 x 240 pixels colour display. LCD with selectable backlight

Screen: 5 readings per second

Conversion Rate: 100ms

Resolution: Up to 0.1 Lux & 0.1uW/cm2 (configurable)

Dimensions: 163mm(h) x 80mm (w) x 25mm(d);

                       With rubber boot = 168mm(h) x 85mm(w) x 30mm (d)

Weight: 350g (0.77 pounds) including batteries

Power: 2 x 1.5 V AA Alkaline Batteries

PC Connectivity: USB or mains charging capabilities

IP Standard: IP54


Resolution: Settable in menu system

Overall Accuracy: +/- 3% measured against primary standard

Temperature Coefficient: less than +/- 0.01%/C (0 to 50C)

Irradiance range: UV-A - 0 - 10000 uW/cm2, Visible - 0 - 10000 lux

Spectral range: UV-A - 320-400nm, Visible - 460-680nm

Product Enquiry

Note: HTML is not translated!
    Low           High


Tags: LumaCheck, UV Lamp