Ferrotest
Mobile Power Packs
Our high-current Ferrotest mobile power packs provide maximum AC magnetising currents from 1000 Amps up to 7100 Amps. The Ferrotest GWH packs provide both AC and HWDC; they generate test currents from 1050 Amps to 7100 Amps. All Ferrotest units are provided with following built-in standard functions:
Constant current magnetisation
Constant current is initiated upon operating a foot or hand switch. An electronic system regulates the test current from 0 to maximum in approx. 200 ms, which avoids unnecessary peak loading of the mains supply.
Impulse magnetisation
If the impulse operation is selected a sequence of single impulses is produced according to a factory-set on/off duty cycle of (1 s/1 s).
Demagnetisation
After selecting the demagnetisation setting, the test current is regulated from the set maximum value to 0 in approximately 600 ms.
Ordering Information
Ferrotest 10: 061140 230V/50Hz, 1000A AC
Ferrotest 20: 061280 400V/50Hz, 2000A AC
Ferrotest 40: 061400 400V/50Hz, 2800A AC
Ferrotest 60: 061600 400V/50Hz, 4200A AC
Ferrotest 100: 061900 400V/50Hz, 7100A AC
Ferrotest GWH 15: 062150 400V/50Hz, 1050A AC, 950A
HWDC
Ferrotest GWH 40: 062400 400V/50Hz, 2800A AC, 2000A
HWDC
Ferrotest GWH 60: 062600 400V/50Hz, 4200A AC, 3000A
HWDC
Ferrotest GWH 100: 062900 3 x 400V/50Hz, 7100A AC, 5000A HWDC
Special Voltages: 056501 For all mobile power packs
Accessories for Mobile Power Packs
Foot switch: 056225 For activating magnetisation impulse. 3m cable length.
Standard Prob Set: 056200 One handle with control cable and one handle without control cable
Dual Prob Assembly: 056205 Electrode distance 250mm
Melt-off electrodes Type A: 129110 Test current up to 1500 A
Melt-off electrodes Type B: 129111 Test current 1500-3000 A
Melt-off electrodes Type C: 129112 Test current 3000-8000 A
Product Properties
NDT Type: Fluorescent Magnetic Particle Testing, Visible
Magnetic Particle Testing
Applications
Ideal Application: Testing at a fixed installation, Testing
components that are too large or heavy to be inspected by standard
fixed-position MPI equipment
Compliance
Standards: DIN EN ISO 9934-3:2002, DIN VDE 0100-410:2007,
DIN VDE 0100-540:2012, EN 60204-1:2006