MagnaCheck
Tangential Field Strength Meter
The Baugh & Weedon MagnaCheck is a powerful electromagnetic field
detector (otherwise known as a gaussmeter or magnetometer) used to measure the
strength and direction of magnetic fields. It is the first in its class to
incorporate a 3D sensor that displays the information in X, Y and Z planes
which has allowed users to save time by increasing efficiency. Match that with
an ergonomic, rugged design and you have an instrument that will get the job
done reliably every time, no matter where you are.
Specification
3D Probe |
1D Probe |
|
Measurement range |
To 2000 Gauss |
To 1000 Gauss |
Units |
Gauss, mTesla, Ka/m |
|
Measurement modes |
DC, AC peak, true RMS |
|
MPI bench support |
True RMS for thyristor switched fields |
True RMS and shot time measurement** |
Peak hold mode |
Off, 1, 2, 5 and 10 seconds |
|
Measurement sample rate |
70 samples/second |
500 samples/second |
Measurement resolution |
0.16 Gauss |
0.1 Gauss |
Probe types |
3D Auto Recognition |
1D Transverse |
Sensor calibration |
Stored digitally in probe |
|
Measurement accuracy |
1% |
|
Standards compliance |
ASTM E1444/1444M-16 and EN ISO 9934-3 |
|
Zeroing |
Manual zero with null pot supplied |
|
Display type |
Colour LCD with selectable backlight |
|
Display size and resolution |
70mm (2.8”) 320x240 pixels |
|
Power |
2 x 1.5V AA batteries. |
|
Typical battery life |
In excess of 10 hrs continuous use |
|
Instrument dimensions |
163mm (6.4")(h) x 80mm (3")(w) x 25mm
(1")(d) With rubber boot: 168mm (6.6") (h) x 85mm
(3.3” )(w) x 30mm (1.2”)(d) |
|
Instrument weight |
350g (0.77lb) including batteries |
|
|