Agfa Structurix G135
Developer &
Replenisher
The Agfa Structurix G135
developer is designed for automatic processing of X-ray films. The Agfa
Structurix G135 developer is supplied in a box containing two identical
semi-assemblies, each consisting of three components (5 liters of component A,
0.5 liters of component B and 0.5 liters of component C). Each of the semi-sets
can be diluted with up to 20 liters of working solution.
Features
- Excellent
stability when stored as a concentrate.
- Stable
performance at high temperature and high humidity.
- Resistant
to oxidation under normal operating conditions.
- High
development speed.
- Exceptional contrast of the resulting images.
- The self-cleaning properties of the finished solution prevent precipitation in the tank.
Ordering
Information
Three-part pack,
for Automatic or Manual Processing to make either:
2 x 20 L Working Solution
(automatic processing)
2 x 25 L Working Solution
(manual processing)
Applications
Recommendations for dilution of
concentrate G135
To dilute one semi-set of the
developer, it is necessary to pour 5 liters of concentrate (component A) into a
container with 10 liters of water (water temperature from + 15 ° C to + 40 °
C), add 0.5 liters of concentrate (component B) and add 0.5 liters of
concentrate (component C). After that, it is necessary to add the remaining 4
liters of water to the resulting solution.
ATTENTION! After each addition of
the next component of the concentrate, the solutions should be thoroughly
mixed.
Storage conditions
In the process of storage, chemical reagents should have optimal temperature limits, which, in accordance with the regulatory and technical documentation, make up the temperature range from + 4 ° C to + 23 ° C. A positive temperature range for the use of these chemical reagents is primarily due to the high water content in their composition. These chemical reagents at low temperatures (up to -50 ° C) slightly change their physicochemical properties.
In case of freezing of chemical
reagents, it is necessary to defrost them at room temperature and apply them as
usual.